Cart (0)
Your shopping cart is empty!
Intex 59631 repair kit for inflatable products
Intex 59631 repair kit for inflatable products
Intex 59631 repair kit for inflatable products
Intex 59631 repair kit for inflatable products
Intex 59631 repair kit for inflatable products
Intex 59631 repair kit for inflatable products
Product Code: Intex-59631 Intex

Intex 59631 repair kit for inflatable products

Compare this Product
In Stock
Артикул
Intex-59631
Type
Vinyl Stickers
Size
7cm x 7cm
Quantity inside
6 patches
200 ₽
Самоклеющаяся ремонтная заплатка Intex 59631 предназначена для любых изделий из винила - надувных кроватей, лодок, плавательных бассейнов, надувных матрасов, надувных игрушек и других подобных продуктов.

Инструкция по применению:
1.Очистить и просушить поверхность.
2. Вырезать заплатку нужного размера.
3. Удалить бумажное покрытие, положить заплатку на дырку и СИЛЬНО ПРИЖАТЬ.
4. Не надувать в течении 30-ти минут.

 
Specifications
Type
Vinyl Stickers
Size
7cm x 7cm
Quantity inside
6 patches
When working with working solutions:

do not use in a poorly ventilated area;
use rubber gloves;
in case of contact with the mucous membrane of the eye, rinse thoroughly with water.
When working with concentrate:

avoid contact with the skin and eyes, use personal protective equipment (glasses, rubber gloves, aprons).
in case of contact with the skin, rinse immediately with plenty of water;
in case of contact with eyes, rinse immediately under running water for 10-15 minutes and consult a doctor;
do not allow the drug to be taken orally. If the product gets into the stomach, you need to drink several glasses of water with 10-30 tablets of activated carbon;
in case of accidental leakage of the product, use individual protective clothing (overalls, boots) and personal protective equipment: for the respiratory organs - universal respirators of the RPG-67 or RU-60M type with a B cartridge, for the eyes - sealed glasses, for the skin of the hands - rubber gloves.
Attention! Contamination of the concentrate and mixing with other detergents is not allowed. There is a danger of rapid disintegration of the product.
Sanitary treatment of surfaces and objects is carried out in accordance with the instructions for use for specific industries (dairy, beverage production, beer and alcohol, meat and poultry processing, etc.).
Surfaces for disinfection must be prepared: conduct an alkaline and / or acid wash. Rinse with water and disinfect.
Sanitary treatment of surfaces and objects is carried out in accordance with the instructions for use for specific industries (dairy, beverage production, beer and alcohol, meat and poultry processing, etc.).
For various disinfection purposes, use an aqueous solution of 0.01-1.0 % concentration immediately before use, observing precautionary measures.
Disinfect the pre-washed equipment or product in any available way: by circulation, immersion, irrigation, volumetric treatment with aerosols, CIP systems, etc. The
duration of disinfection is 0.1-30 minutes. at a temperature of +1 to +85C.
After treatment, wash the surfaces with clean water or disinfected water.
Disinfection of water is carried out by adding the drug at the rate of 50-200 ml per 1 cubic meter of water.
In the installations of contact cooling of poultry carcasses, the drug is used in accordance with the" instructions " in concentrations of 0.008–0.06%, depending on the technological conditions of the enterprise.
To disinfect the processing of vegetables, fruits and herbs, use an aqueous solution of 0.01–0.3% concentration.
Auxiliary agent concentration 0.008-0.1%
Disinfection CIP concentration 0.2-0.5%
External disinfection 0,4-1,0%
The product does not have a prolonged effect (it does not accumulate on the surface and is unstable in solution for more than 4-6 hours).